One of the main concerns that arise with VR headsets is the battery life. The last thing you want is for your Quest 2 to die in the middle of an intense gaming session. That’s why understanding how to properly charge your device and optimize its charging speed is crucial.

In this blog, we’ll explore some tips and tricks to help you charge your Oculus Quest 2 efficiently, ensuring that you get the most out of your VR experience.

Oculus Quest 2 Charging Speed

The batteries in the Quest 2 have a capacity of roughly 3,640 mAh. Typically, it takes around 2 to 3 hours to charge the Quest 2 from 0% to 100% using the ZyberVR link cable and a charger.

The charging time of the Quest 2 depends on various factors, including the battery’s current state, the charger used, and the charging method. It is recommended to use a high-quality USB-C cable with the Quest 2 like the ZyberVR link cable for optimal charging speed.

Additionally, using the device while charging may slow down the charging speed, and it’s best to leave the Quest 2 alone while charging to optimize the charging time. It is also important to note that using the device at its highest refresh rate of 120 Hz will drain the battery much more quickly, and may require frequent charging if used extensively.

In such cases, it is recommended to invest in external charging solutions such as the ZyberVR magnetic battery pack, which allows you to use the Quest 2 while playing and extends the device’s battery life.

How To Charge Your Oculus Quest 2?

The majority of users claim that the headset and controllers have relatively decent battery life, although eventually, you will need to charge them both. While the controllers itself just need a single AA battery to function, the headset itself includes a built-in battery that can be recharged using the USB-C port on the side of the device.

Charging Your Quest 2 Controllers

1. Connect the small end of the included USB-C cable to the charging port on one of the controllers. The charging port is located at the bottom of the controller, near the wrist strap.

2. Connect the other end of the cable to a USB port on your computer or a USB wall adapter.

3. If you are using a USB wall adapter, plug it into a power outlet.

4. The controller’s LED indicator light will turn orange to indicate that the controller is charging.

5. Leave the controller to charge until the LED indicator light turns white. This may take up to 2 hours for a full charge.

6. Once the controller is fully charged, disconnect it from the USB cable.

7. Repeat the same process for the second controller.

Charging Your Quest 2 Headset

1. Connect the USB-C end of the ZyberVR link cable to the Quest 2 headset. The USB-C port is located on the bottom of the device.

2. Connect the other end of the ZyberVR link cable to a USB port on your computer or a USB wall adapter.

3. If you are using a USB wall adapter, plug it into a power outlet.

4. The headset should display a charging indicator in the form of a battery icon with a lightning bolt in it, located in the top right corner of the headset’s display. This indicates that the device is charging.

5. Leave the device to charge until it reaches a full charge. It is recommended to leave the device charging for at least 2-3 hours to ensure a full charge.

6. Once the device is fully charged, unplug the ZyberVR link cable from the device and the power source.

How To Extend The Battery Life Of Meta Quest 2?

Purchasing the ZyberVR magnetic battery pack that attaches to the headset is among the good options. Here are some tips to extend the battery life of your Oculus Quest 2:

1. Adjust the brightness: Lowering the brightness of the Quest 2 can significantly improve battery life. You can do this by going to Settings > Device > Display > Brightness.
2. Turn off Bluetooth: If you’re not using any Bluetooth devices, such as headphones or controllers, turn off Bluetooth in Settings > Device > Bluetooth. Bluetooth consumes a lot of battery power, and turning it off can improve battery life.
3. Close background apps: Closing background apps that you’re not using can help conserve battery life. You can do this by pressing the Oculus button, selecting the app, and then selecting Close.
4. Limit the use of power-hungry apps: Some VR apps are more power-hungry than others. Limit the use of these apps to extend your Quest 2’s battery life. You can monitor which apps are using the most power by going to Settings > Device > Battery.
5. Charge your device before use: Fully charge your device before using it to ensure you get the most out of your battery. Using your device when the battery is low can also reduce its lifespan.
6. Use the Power Saving Mode: The Power Saving Mode reduces the performance of the device to conserve battery life. You can turn on this mode by going to Settings > Device > Power Saving Mode.
7. Invest in a ZyberVR Battery Head Strap: This attaches to the back of your Quest 2 headset and provides additional hours of battery life. The ZyberVR Battery Head Strap is also especially beneficial for longer VR sessions where the weight of the headset can become uncomfortable.

Quest 2 Charging Accessories:

1. New Charging Dock CD-02

2. Direct Charge Controller Grips

3. New Link Cable LC02

4. ZyberVR Charging Cable